No RST support for PCIe storage devices in AHCI mode. Issue with detecting PCIe storage when remapping is enabled on HM170/QM170 is fixed with the Pre-OS build 14. RST 14.6 release enables support for new platforms & features (includes legacy support for platforms and features supported in RST 14.5): Skylake mobile U/Y Corporate Platform, SKL-U 2+3e Platform and Support for NVMe API The Devslp tool is posted under the CLI tool components on VIP kit. The RAID OROM & UEFI version for this release is 14., the driver and user interface version is 14. Known Issue is defined as a potential RST issue that has been replicated internally by the Rapid Storage Technology team but has not been root caused to be an RST defect. This download is valid for the products listed below: RAID 1 going into 'failed' state during copying files to the volume. Extremely low performance during copying file to RAID volume with PCIe AHCI SCSI Compliance Test 2.0 fails with NVMe disks Cannot create RAID/SRT when RTD3 is enabled in BIOS BSOD 0x9F occurred as reboot system after finishing Burn-in tool (4 hours) (add HDD R/W loading) test Recovery volume can’t be built in IRST when the secondary hard drives size is the same as the prim Trim doesn't work on RAID0 on SATA SSD disks BSOD/Hung observed while resuming from CS with PCIe AHCI drives in remapped state IAStorUI has stopped working" when click 'Manager' tab (Unit with M2 PCIe SSD) with no empty port available
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |